Home › Areas › Dubai › DAMAC Hills 2
Shower Glass in DAMAC Hills 2
DAMAC Hills 2 is a community of clusters: townhouses and villas in Mulberry, Albizia, Claret, Trixis, Astelia, Amargo, Basswood and Juniper, most of them family homes with a generous master ensuite and several hard-working secondary bathrooms. Because the housing is recent, the shower glass conversation here starts at a different point from older communities. It is often about finishing a bathroom properly at handover, correcting a developer-fitted enclosure that never quite worked, or planning the secondary bathrooms the standard specification treated as an afterthought. ShowerTubGlass covers Hills 2 for shower glass in Dubai on those terms: measurement of the finished room first, an honest repair where the existing glass deserves one, and made-to-measure systems where the layout itself is the problem. The original DAMAC Hills districts — Golf Town, Richmond, Trinity and their neighbours — are covered separately in shower glass in DAMAC Hills (Hills 1).
Send wide photographs, your cluster name and whether the job is a handover bathroom, a fault in fitted glass or a layout you want changed, and the first advice can be tied to the room you actually have.
The DAMAC Hills 2 clusters
Mulberry, Claret, Trixis, Albizia, Aster, Amargo, Basswood and Juniper.
The clusters repeat villa and townhouse types, which tempts a shortcut: assuming a neighbour’s enclosure, or the show villa’s, is a template for yours. It is not. Two bathrooms under the same cluster heading can differ by the few millimetres of tile build-up, wall truth or floor level that decide whether a panel fits and a door closes cleanly — and they can call for different answers altogether. One may suit a hinged door in a generous master ensuite; another, a sliding door in a narrower family bathroom; another, a screen over the bath. We plan by opening, spray direction, clearance and use, never by applying one standard enclosure to every home in the cluster.
What the cluster name does tell us is the stage and shape of the housing: family bathrooms used by children and guests as much as by the owners, master ensuites with room to plan properly, and glass that is young — so when something is wrong, it is usually a set-up, specification or finishing fault rather than wear.
Handover, snagging and first fixes
For Hills 2, measurement discipline matters from the first conversation. A drawing can show an opening; it cannot show the finished tile build-up, whether both walls are true, the exact floor line, or the space a door needs once the basin and WC are in place. Start with photographs during snagging if that helps the design discussion, but specify the glass from the finished bathroom.
That discipline also frames the first-repair conversation. Developer-fitted glass in a new home can develop early complaints — a door that has settled slightly and no longer meets its seals, a sliding panel whose guides were set tight, silicone lines that were never fully closed at the ends. Some of those are snagging items for the developer, and if your photographs point that way we will say so. Others are the standard specification working exactly as designed — a fixed panel whose open entrance was always going to let spray through is not a defect, it is a layout, and changing it is an upgrade decision rather than a snag. The honest verdict comes first either way, before any replacement is discussed.
Shower glass services in DAMAC Hills 2
Repairs and diagnosis first
The first route is shower glass repair: establish whether the fault sits in a replaceable component, an alignment problem, failed sealing or the panel and layout themselves. In DAMAC Hills 2, useful repair conversations include:
- Hinged doors that have dropped, scrape, or no longer close against their seals.
- Hinges, handles and other hardware that are worn, loose or were set poorly at fitting.
- Leaks at the closing edge, bottom line or fixed-panel joints.
- Sliding doors that stick, judder, jump their line or leave an uneven gap.
- Bath screens that leak at the bath edge or move because their fixing or seal has failed.
- Enclosures that flex because a panel is poorly braced or the original sequence was wrong.
For a sliding fault, the diagnosis route is set out in our guide to a sliding shower door not sliding properly. If several faults have accumulated, the wider repair or replace an old shower enclosure framework helps separate a sensible component repair from money spent prolonging a badly planned enclosure.
New installations by system
New shower glass installation is specified system by system:
- Hinged shower glass doors for ensuites with a clear swing path. In a corner, the fixed panels, corner bracing and hinge side are planned together rather than treating the door as an afterthought.
- Sliding shower glass doors where a hinged door would consume the room’s usable floor. The panel needs somewhere to park, and the overlap reduces the clear entry — both are checked before sliding is recommended.
- Shower screens and fixed walk-in glass where an open entrance suits the room’s size and spray pattern. A screen is sized and positioned against the real splash zone, not simply centred on the opening.
- Bathtub glass screens for bathrooms keeping the bath, with fixed or hinged glass considered against the bath edge, taps, shower position and the room available for a moving panel.
- Corner and multi-panel layouts. Wider ensuites can support corner, L-shaped or return-panel arrangements. The layout rules — entry first, swing second, panel sequence third — are covered in our guide to corner and L-shaped enclosure layouts.
Hardware can be chrome, black or gold. The quotation is then built from the measured system and the factors explained in how shower glass pricing works; this page carries no figures, and the exact quote follows measurement.
What typically goes wrong in DAMAC Hills 2 bathrooms
The common risk in Hills 2 is early in the process. Glass is sometimes discussed from a plan before the bathroom’s finished dimensions are known, or a single familiar layout is applied to a room whose door swing, head position or entry would suit another system. A fixed panel may look clean and minimal but leave its opening in the direct spray. A hinged door may clear on a drawing yet meet the basin in use. A sliding door may save swing space but leave too little entry after the panel parks and overlaps. These are planning errors, not reasons to distrust any one system; measuring the finished room and drawing the door’s movement prevents most of them.
The second pattern is young-glass behaviour. In the first years, faults tend to be set-up faults: a heavy door losing its line as fixings settle, seals that were never fully seated, a sliding track becoming less forgiving as scale and grit collect where the rollers run. Most are adjustment and component subjects, not enclosure failures — but they should be read properly rather than lived with, because a door run out of line wears its seals and hardware faster than one running true.
Secondary bathrooms deserve the same rigour as the master ensuite. They are often the rooms used by children and guests, and a door that is awkward to enter or a bath screen that leaks at one end becomes a daily nuisance. A smaller room does not need a lesser decision — it needs the system whose movement and entry fit it, which is why sliding shower doors for small bathrooms are assessed by wall run and clear entry rather than by floor area alone.
How it works
- Send photos on WhatsApp — wide shots of the shower or bath, a close-up of any fault, rough sizes, and your cluster name. Most quotes and diagnoses start there.
- We measure — the opening is the specification. True widths, levels and swing or slide paths are checked on site before any glass is cut.
- Glass is made — panels are cut and finished to those measurements, with hardware matched to your chosen finish.
- Install and seal — fitted and aligned on the day; water testing and first use follow the sealant’s curing time, confirmed in writing at handover.
Frequently asked questions
Do you cover all the DAMAC Hills 2 clusters?
Yes — Mulberry, Claret, Trixis, Albizia, Aster, Amargo, Basswood and Juniper. Name the cluster with your photographs; it frames the housing type and stage, but the final advice always comes from your bathroom’s measurements and layout. DAMAC Hills 1 has its own page.
We are taking handover in Hills 2. When should the shower glass be measured?
Start with photographs and rough sizes during snagging, then measure once tiling and the bathroom’s final levels are complete. A developer drawing is useful background, but it does not capture tile build-up, small changes in wall position or the true relationship between the shower, basin and WC. Glass made to the finished room avoids inheriting those differences.
Our neighbours in the same Hills 2 cluster have a layout we like. Can we order the same glass for our house?
Use it as a starting point, not as a template. Mulberry, Claret and the other Hills 2 clusters repeat townhouse and villa types, but the finished opening in your home can differ through tile build-up, wall truth, floor level and the final positions of the basin and WC. A neighbour’s layout may also clear or contain spray differently in your room. We measure your finished bathroom and check the swing, entry and spray zone before recommending whether the same arrangement genuinely fits.
The developer-fitted glass in our new Hills 2 home has leaked since handover. Is that a snagging item or a reason to replace it?
It could be either, and the distinction matters. A door that has settled, guides set too tightly, seals not fully seated or silicone left unfinished at the ends are set-up faults that may belong on the snagging list. A fixed panel whose open entrance sits directly in the spray is different: the standard layout may be working as designed, and changing it is an upgrade decision. Photographs usually show which conversation applies; replacement is only sensible once a set-up repair has been ruled out.
We are finishing a master ensuite and a children’s bathroom in our townhouse. Should both be planned the same way?
Plan each room on its own measurements, then coordinate the finishes. A master ensuite in Hills 2 may have the swing and spray space for a hinged door or fixed screen, while the family bathroom may centre on a bath, a tighter entry and children or guests using it daily. That room might need a bath screen or a sliding panel instead. Copying dimensions or a layout from one bathroom to the other is how doors clash, entries shrink and spray escapes; measuring each finished room avoids that.
Talk to us about your DAMAC Hills 2 shower glass
Send photos and rough sizes on WhatsApp — a real person reads them, and the quote or diagnosis starts there. Tell us your cluster, and whether the job is a fault in existing glass, a handover bathroom or a layout you want changed.
Call or message: +971 52 443 2655